Filter
Top Products
Telephone and External devices
61
7
e Press Phone Line Set.
f Press PBX, ISDN (or Normal).
g Press Stop/Exit.
PBX and TRANSFER 7
The machine is initially set to Normal, which
lets the machine connect to a standard PSTN
(Public Switched Telephone Network) line.
However, many offices use a central
telephone system or Private Branch
Exchange (PBX). Your machine can be
connected to most types of PBX. The
machine's recall feature supports timed break
recall only (TBR). TBR will work with most
PBX systems allowing you to gain access to
an outside line, or transfer calls to another
extension. The feature works when the R
button on the LCD or the R key on the control
panel is pressed.
Note
You can program a press of the R LCD
button key as part of a number stored in a
Speed Dial location. When programming
the Speed Dial number, press R first (the
LCD shows ‘!’), then enter the telephone
number. If you do this, you do not need to
press R each time before you dial using a
Speed Dial location. (See Storing
numbers on page 69.) However, if PBX is
not chosen in the Telephone Line Type
setting, you cannot use the Speed Dial
number that the R press is programmed
into.
BT Call Sign (U.K. only) 7
This machine feature lets you use the BT Call
Sign subscriber service which allows you to
have at least two separate telephone
numbers on one telephone line. Each
telephone number has its own distinctive
ringing pattern, so you know which telephone
number is ringing. This is one way you can
have a separate telephone number for your
machine.
Your machine has a BT Call Sign compatible
distinctive ringing function, allowing you to
dedicate a second telephone number (on the
same telephone line) just for receiving faxes.
Note
• You can switch BT Call Sign off
temporarily, then turn it back on. When
you get a new fax number, make sure you
reset this function. This machine will
automatically answer incoming calls that
use your new fax number.
• When you set the BT Call Sign feature to
ON, the receive mode is set to Manual
automatically. Manual mode will not
respond to incoming telephone calls,
since the number you use for telephone
calls will use the normal ring pattern.
To enable the machine to work with BT
Call Sign (With your external
telephone only)
7
a Press MENU.
b Press a or b to display Fax.
c Press Fax.
d Press a or b to display
Miscellaneous.
e Press Miscellaneous.
f Press a or b to display BT Call Sign.
g Press BT Call Sign.
h Press On (or Off).
i Press Stop/Exit.
Note
If you turn off BT Call Sign, the receive
mode stays in Manual. You will need to
set receive mode again. (See Choose the
Receive Mode on page 43.)