Brother MFC-790CW Fax Machine User Manual


 
Chapter 9
76
Listening to your OGM 9
a Press MENU.
b Press a or b to display Fax.
c Press Fax.
d Press a or b to display Setup TAD.
e Press Setup TAD.
f Press OGM.
g Press TAD Message or F/T Message.
h Press Playing OGM.
Adjust the volume by pressing d or c.
i Press Stop/Exit.
Erasing your OGM 9
a Press MENU.
b Press a or b to display Fax.
c Press Fax.
d Press a or b to display Setup TAD.
e Press Setup TAD.
f Press OGM.
g Press TAD Message or F/T Message.
h Press Erase MSG.
i Do one of the following:
Press Yes to erase the OGM.
Press No to exit without erasing.
j Press Stop/Exit.
Fax/Tel OGM
(Announcement) 9
If your machine is set to Fax/Tel receive
mode this message will be played by your
Brother machine to a caller. Unlike the TAD
OGM, the caller will not be able to leave a
message.
To record your Fax/Tel OGM follow the
instructions on Outgoing message (OGM)
on page 75.
If you need to review the steps for setting up
the Fax/Tel receive mode, see Receive
modes on page 43.
Activating TAD mode 9
When the light glows, TAD mode is
active. Press to enter TAD mode.