Filter
Top Products
Chapter 5
40
Overseas Mode 5
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a Press (Fax).
b Load your document.
c Press d or c to display
Overseas Mode.
d Press Overseas Mode.
e Press On (or Off).
Delayed Faxing
(Monochrome only) 5
During the day you can store up to 50 faxes
in the memory to be sent within 24-hours.
These faxes will be sent at the time of day you
enter in step f.
a Press (Fax).
b Load your document.
c Press d or c to display Delayed Fax.
d Press Delayed Fax.
e Press On.
f Enter the time you want the fax to be
sent (in 24-hour format) using the
buttons on the LCD.
(For example, enter 19:45 for 7:45 PM.)
Press OK.
Note
The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.
Delayed Batch Transmission
(Monochrome only) 5
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
a Press (Fax).
b Press d or c to display Batch TX.
c Press Batch TX.
d Press On.
e Press Stop/Exit.
Checking and cancelling
waiting jobs 5
You can check which jobs are still waiting in
the memory to be sent and cancel a job. (If
there are no jobs, the LCD shows
No Jobs Waiting.)
a Press MENU.
b Press a or b to display Fax.
c Press Fax.
d Press a or b to display
Remaining Jobs.
e Press Remaining Jobs.
Any waiting jobs appear on the LCD.
f Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
g Do one of the following:
To cancel, press Yes.
If you want to cancel another job go
to step f.
To exit without cancelling, press No.
h When you have finished, press
Stop/Exit.