Brother MFC-8480DN All in One Printer User Manual


 
General Setup
29
3
Dial Prefix 3
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up the prefix number 3
a (USA) Press Menu, 0, 5.
(Canada) Press Menu, 0, 6.
b Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
Note
You can use the numbers 0 to 9, #, l and
!. (Press Hook to display “!”.)
You cannot use ! with any other numbers
or characters.
If your telephone system requires a timed
break recall (hookflash), press Hook to
enter the break.
(Canada only) If the pulse dialing mode is
on, # and l are not available to use.
c Press Stop/Exit.
Changing the prefix number 3
a (USA) Press Menu, 0, 5.
(Canada) Press Menu, 0, 6.
b Do one of the following:
To change the prefix number, press
1.
To exit without making a change,
press 2 and go to d.
c Enter a new prefix number using the dial
pad (up to 5 digits), press OK.
d Press Stop/Exit.