Filter
Top Products
Chapter 8
70
Press OK if you don’t want to change
the default resolution.
i (MFC-8690DW and MFC-8890DW)
You can save a fax/scan resolution
along with the number. Do one of the
following:
If you selected Fax/IFAX in step d,
press a or b to select Std, Fine,
S.Fine or Photo.
Press OK.
If you selected E-mail in step d,
press a or b to select Color100dpi,
Color200dpi, Color300dpi,
Color600dpi, Gray100dpi,
Gray200dpi, Gray300dpi,
B&W200dpi or B&W200x100.
Press OK.
Press OK if you don’t want to change
the default resolution.
Note
If you have selected Fax/IFAX in step d
and added One-Touch or Speed-Dial
numbers that are stored as ‘I-Fax’, you
cannot select S.Fine.
j (MFC-8690DW and MFC-8890DW)
If you selected Black & White in step e,
select the file format (TIFF, PDF or
Secure PDF) that will be used to send to
your PC. If you selected Gray or Color in
step e, select the file format (PDF,
Secure PDF, JPEG or XPS) that will be
used to send your PC.
Press OK.
Dialing access codes and
credit card numbers 8
You can combine more than one Quick Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
carrier.
For example, you might have stored ‘555’ on
Speed Dial #003 and ‘7000’ on Speed Dial
#002. You can use them both to dial
‘555-7000’ if you press the following keys:
Hold down Shift as you press
Search/Speed Dial, 003.
Hold down Shift as you press
Search/Speed Dial, 002 and Start.
Numbers can be added manually by entering
them on the dial pad:
Hold down Shift as you press
Search/Speed Dial, 003, 7001 (on the dial
pad), and Start.
This would dial ‘555-7001’. You can also add
a pause by pressing Redial/Pause.
Pause 8
Press Redial/Pause to insert a 3.5-second
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.
Tone or Pulse (Canada only) 8
If you have a Pulse dialing service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
a Press Hook.
b Press # on the machine’s control panel.
Any digits dialed after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialing service.