Filter
Top Products
Chapter 9
72
Paging 9
When Paging is chosen, the machine dials
the cell phone or pager number you
programmed. This activates your cell phone
or pager so you will know that you have a fax
message in the machine’s memory.
a Press Menu, 2, 5, 1.
25.Remote Fax Opt
1.Fwd/Page/Store
a Off
b Fax Forward
Select ab or OK
b Press a or b to choose Paging.
Press OK.
c Enter your cell phone or pager number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press
1 8 0 0 5 5 5 1 2 3 4 # #
d Do one of the following:
If your pager needs a PIN, enter the
PIN, press #, press Redial/Pause,
enter your fax number followed by #
#.
Press OK
(For example, press:1 2 3 4 5 #
Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 #
#)
If you do not need a PIN, press OK.
If you are programming a cell phone
number, press OK.
e Press Stop/Exit.
Note
• If you have set Paging, a backup copy will
automatically be printed at the machine.
• You cannot change a Paging or PIN
number remotely.
Fax Storage 9
The Fax Storage feature lets you store your
received faxes in the machine’s memory. You
can retrieve stored fax messages from a fax
machine at another location using the remote
retrieval commands. (See Retrieving fax
messages on page 76.) Your machine will
automatically print a copy of the stored fax.
a Press Menu, 2, 5, 1.
25.Remote Fax Opt
1.Fwd/Page/Store
a Off
b Fax Forward
Select ab or OK
b Press a or b to choose Fax Storage.
Press OK.
c Press Stop/Exit.