Filter
Top Products
114
Out of Memory The machine's memory is full. If a fax-sending or copy operation
is in process:
Press or Quit or Close and
wait until the other operations that
are in process finish, and then try
again.
Press Send Now to send the
pages scanned so far.
Press Partial Print to copy
the pages scanned so far.
Clear the data in the memory. To
gain extra memory, you can turn
off Memory Receive.
(See Advanced User’s Guide:
Turning off Memory Receive
operations.)
Print the faxes that are in the
memory. (See Advanced User’s
Guide: Printing a fax from the
memory.)
Paper Jam [Front] The paper is jammed in the machine. Remove the jammed paper by
following the steps in Printer jam or
paper jam on page 121.
Make sure the paper guides are set to
the correct paper size. DO NOT
extend the paper tray when you load
A5 or smaller size paper.
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine. Make sure paper is not still
jammed in the machine. (See
Additional paper jam clear operations
on page 125.)
Error Message Cause Action