Filter
Top Products
Chapter 3
46
d Place your document, face up, short
edge first in the ADF until the
Touchscreen shows ADF Ready. and
you feel it touch the feed rollers.
When using ADF High Speed
Mode in Copy and Scan mode
Make sure your document size is
Letter, A4 or Executive.
Place your document, face up, long
edge first in the ADF until
Touchscreen shows ADF Ready.
and you feel it touch the feed rollers.
NOTE
ADF High Speed Mode is available with
Copy and Scan mode. For the information
about ADF High Speed Mode, see the
followings:
•(Copy)
ADF High Speed Mode copying
on page 80
• (Scan)
ADF High Speed Mode scanning
on page 96
IMPORTANT
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
Using the scanner glass 3
You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported 3
How to load documents 3
NOTE
To use the scanner glass, the ADF must
be empty.
a Lift the document cover.
Length: Up to 17.0 in (431.8 mm)
Width: Up to 11.7 in (297 mm)
Weight: Up to 4.4 lb (2 kg)