PhotoCapture Center
®
107
7
For Network Users
(For models with built-in network support) 7
a Put a USB Flash memory drive, CompactFlash
®1
, Memory Stick
®2
, Memory Stick Pro™
2
,
MultiMediaCard™, SecureDigital™ or xD-Picture Card™
3
into your machine.
1
This product also supports CompactFlash
®
type1.
2
MagicGate Memory Stick
®
and Memory Stick Pro™ can be used, but any music data that is stored on the stick cannot be read.
3
This product supports xD-Picture Card™ Type M/Type H.
b Start your browser software in which FTP is supported. Your browser software accesses the media using
the FTP protocol and the network Host Name of the machine. You can also access the media by entering
ftp://XXX.XXX.XXX.XXX (where XXX.XXX.XXX.XXX is the IP address of your Brother machine) from
your web browser.
c Click the name of the file you want to see.
When you take out a media, do the following to prevent damage to the media.
7
a Close the browser.
b Wait until the (PhotoCapture) key stops blinking before taking out the media.
CAUTION
DO NOT unplug the power cord, USB cable or remove a USB Flash memory drive, CompactFlash
®
,
Memory Stick
®
, Memory Stick Pro™, MultiMediaCard™, SecureDigital™ or xD-Picture Card™ from the
machine while it is reading it (when the (PhotoCapture) key is flashing). You could lose your data
or damage the data.
If you take out the media while the PhotoCapture key is flashing, you must restart your PC at once before
putting the same media back into the machine. If you do not restart your PC, the data on your media may
be destroyed.