Filter
Top Products
Scanning
37
2
e If you want to change some advanced settings, click Adjust the quality of the scanned picture (3).
You can choose Brightness, Contrast, Resolution and Picture Type from Advanced Properties.
Click OK after you choose the settings.
Note
By default, the scanner resolution can be set to a maximum of 1200 dpi.
If you want to scan at higher resolutions, use the Brother Scanner Utility. (See Brother Scanner
Utility on page 39.)
f Click the Scan button in the Scan dialog box.
The machine starts scanning the document.
Pre-Scanning and cropping a portion using the scanner glass 2
The Preview button is used to preview an image for cropping any unwanted portions from the image. When
you are satisfied with the preview, click the Scan button in the Scan dialog box to scan the image.
a Put the document face down on the scanner glass.
b Choose Flatbed in the Paper source drop-down list (1).
Note
If your machine has no Auto Document Feeder (ADF), you do not need to specify the Paper source.