Filter
Top Products
Network Scanning (For models with built-in network support)
155
12
Scan to File 12
When you choose Scan to File, you can scan a black and white or color document and send it directly to the
Macintosh
®
you designate on your network. The file will be saved in the folder and file format that you have
configured in ControlCenter2 on the designated Macintosh
®
. You can change the Scan configuration. (See
File on page 141.)
a Load your document.
b Press the (Scan) key.
c Press a or b to choose Sca n to File.
Press OK.
d Press a or b to choose the destination Macintosh
®
you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
Macintosh
®
on the control panel.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the
cursor, then use a or b to enter the second digit. Repeat until you have entered all four digit of the PIN
number. Press OK.
e Press Black Start or Color Start.
The machine starts the scanning process.
Note
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Button tab of the ControlCenter2 configuration screen. (See
SCAN on page 135.)
• If you would like to change the file name of scanned documents, enter the file name in the File Name
section on the Device Button tab of the ControlCenter2 configuration.
• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change
the settings.