Filter
Top Products
2-76 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Descriptions
Operator Parameters/Permissions Description
add
lecselanlec
[LECAddress] <clientatmaddress>
[MACAddress/RouteDesc]
<clientmacaddress/routedescriptor>
[ELANNumber] <elannumber>
Administrator
Adds a LANE client to an existing ELAN on the
LECS. The client must have a unique ATM and
MAC address for an entry to be accepted. You do
not have to specify both addresses, but whatever
you specify has to be unique. These addresses
must be added before entering this command
because you cannot modify these address
parameters once they are set. If modification is
needed, you must first enter
delete lecselanlec,
and then create another LECSELANLEC by
entering
add lecselanlec.
delete
lecselanlec
[LECAddress/MACAddress/RouteDesc]
<clientatm/macaddress/routedescriptor>
Administrator
Removes a LANE client entry from an existing
ELAN on the LECS. The length of the address
(ATM, MAC, Route Descriptor) that you specify
determines which LANE client entry is deleted.
modify
lecselanlec
[LECAddress/MACAddress/RouteDesc]
<clientatm/macaddress/routedescriptor>
[ELANNumber] <elannumber>
Administrator
Changes the ELAN number of the
LECSELANLEC. You cannot modify the LECS
address, MAC address or Route Descriptor. The
[LECAddress/MACAddress/RouteDesc] input
parameter functions only as a pointer to the
relevant ELAN, so you can change the number of
the ELAN. That is the only thing you can modify
with this command. The only way to modify the
LECSELANLEC is to enter
delete lecselanlec
and then enter
add lecselanlec, adding the new
addresses within that command.
show
lecselanlec
[ELANNumber] <elannumber>
All
Displays the LANE clients configured on an
existing ELAN on the LECS. You can see the
ATM and MAC addresses of LANE clients by
entering this command.