Filter
Top Products
SmartCell 6A000/ZX-250 Reference Manual 2-171
Console Commands
Si
g
Fla
g
s
Use SigFlags (signaling flags) to view the status of flags related to signaling. This command is unmodifiable, and the
switch defaults to a UNI3.1 to UNI3.0 translation.
Operator
show
Parameter
Description
Example
switch_prompt # show sigflags
Translation31To30 is enabled
switch_prompt #
SERVER SVC
XX
Output Parameter Description
[Translation3130] UNI route translation from UNI3.1 to UNI3.0.
Operator Parameters/Permissions Description
show
sigflags
All Displays the signaling flag settings. This command is
unmodifiable.