Filter
Top Products
SmartCell 6A000/ZX-250 Reference Manual 2-143
Console Commands
PortTrafficCon
g
estion
Use PortTrafficCongestion (port traffic congestion) to manage traffic congestion parameter for the specified port.
Operators
modify, show
Parameter
Descriptions
SERVER SVC
XX
Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. ALL, A1...A4,
B1...B3, C1...C4,
D1...D4
ALL
[Queue #
Minimum/Maximum
CellCounter]
Value programmed into the switch for minimum/
maximum threshold (in number of cells) for the
specified priority queue (where “#” is 1, 2, 3, or 4).
If the number of cells received by the switch on
the specified priority queue for this port exceeds
maximum threshold value, the switch discards the
cell.
0-4096 0 (Min.)
4096 (Max.)
Operator Parameters/Permissions Description
modify
porttrafficcongestion
[PortNumber] <portnumber>
[Queue#Min/MaxCellCounter]
<queue#min/maxcellcounter>
Administrator
Modifies the traffic congestion settings for a
specified port or all ports. You can change the
minimum and maximum buffer thresholds, in
cells, for each priority queue on a port. Cell buffer
memory then reserves the minimum buffer size for
cells on the specified priority queue of that port.
Cells are discarded when the maximum buffer
threshold is reached.