Filter
Top Products
SmartCell 6A000/ZX-250 Reference Manual 2-187
Console Commands
Descriptions
Examples
switch_prompt # modify switchconfig
SwitchName(switch_1) : switch_2
IPAddress(200.30.72.122) : 1.1.1.202
IPNetMask(255.255.255.0) : 255.255.255.128
switch_prompt #
switch_prompt # show switchconfig
Switch Configuration
==============================================================================
Switch Name :switch 1
CPU Model : i960 CX
CPU Speed : 33 MHz
CPU Board ID : 2
Secondary Flash Type : Asynchronous
CPU DRAM : 8 MB
Common DRAM : 8 MB
SAR Control SRAM : 128 KB
Power Mode : Non-Redundant
Number of Switch Boards : 1
Switch Board 1 ID : 5
Cell Memory Size : 32768 cells
Switch Configuration
Number of Quad Boards : 2
Number of Ports : 4
Quad Board A Type : 622 MBps
Quad Board B Type : 155 MBps
IP Address : 204.95.77.254
MAC Address (Base) : 00:20:D4:14:41:80
Switch Software Type : Server
Software Version : 1.2RQA
Build Number : 9
Build Date : Tue Sep 23 16:39:36 PDT 1997
Software Image Size : 2676256 bytes
Heap Space (Used/Total/%Free) : 2473888/5712288/56.69%
switch_prompt #
Operator Parameters/Permissions Description
modify
switchconfig
[SwitchName] <switchname>
[IPAddress] <ipaddress>
[IPNetMask] <ipnetmask>
Administrator
Runs automatically when you first configure the switch, then
prompts you for the required input. Enter
modify
switchconfig
if you want to change any of the above
parameters after the initial switch configuration. Unless you
are experienced with configuring IP subnets, it is
recommended that you accept the IP netmask default.
show
switchconfig
All Displays hardware and software configuration information
about the switch. It also includes auto-detect hardware
configuration information, such as number of switch boards
and memory, and software information such as the type and
version. Any future hardware or software changes will be
detected automatically when the switch is rebooted.