Filter
Top Products
2-148 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
PVC
Use PVC (permanent virtual circuit) to manage PVCs on specific ports configured on the switch.
Operators
add, delete, activate, deactivate, show
Parameters
SERVER SVC
XX
Input Parameter Description Value/Field Size Default
[ConnType] Connection type for PMP (point-to-multipoint)
or PTP (point-to-point).
PMP, PTP PTP
[LowPort] Port receiving the backward traffic flow of the
high/low pair.
A1...A4, B1...B3,
C1...C4, D1... D4
A1
[LowVPI] Low VPI (virtual path identifier) number. The
range is modifiable by setting [MaxVpibits] at
modify portconfig.
0-maximum 0
[LowVCI] Low VCI (virtual circuit identifier) number.
Modifiable by setting [MaxVcibits] at
modify
portconfig.
0-maximum 33
[HighPort] Port sending the forward traffic flow of the
high/low pair.
A1...A4, B1...B3,
C1...C4, D1... D4
A1
[HighVPI] High VPI number. Modifiable by setting
[MaxVpibits] at
modify portconfig
.
0-maximum 0
[HighVCI] High VCI number. Modifiable by setting
[MaxVcibits] at
modify portconfig.
0-maximum 34
[FwdTrafficDescIndex] Index of the traffic descriptor for the forward
(low-to-high) connection of VCs (virtual
circuits). Create traffic descriptor prior to
creating this PVC.
1, 2, 3, 4.../
1-20
1