Filter
Top Products
2-2 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
[TimeStamp] (</s>) Time (in system up time) when the alarm message entry
was created. The time stamp is in the format
[hrs:mins:secs:msecs].
n/a
[Message] (</s>) Numeric code that specifies the message in the log entry
that generated this alarm message. Actual alphanumeric
message is not stored with the alarm because of the
limited space within the flash files.
n/a
[SequenceNum] (</d>) Sequence number (within the log message buffer) of the
log message entry that generated this alarm message
entry.
1, 2, 3, 4...
[NumParameters] (</d>) Number of informational parameters within alarm
message entry.
1, 2, 3, 4...
[LogLevel] (</d>) Log debug level of the log message that caused the alarm
message to be generated.
1, 2, 3, 4...
[Parameter] (</d>) List of parameters displayed by the alarm message.
Fields include parameter number, type, length, and value.
n/a
The following parameters are visible only with flush alarm:
[Alarm directory] Name of the directory within the flash file system that
contains the alarm message buffer.
ALARM
[AlarmConfig file] Name of the file that contains the current configuration of
the alarm message buffer.
alarmc.db
[Alarm Filename] Base name of the set of files within the flash file system
where alarm messages are stored. Alarm message file
names are composed of the base name and a numeric
offset.
zalarm
[Num of alarm files] Number of alarm files (within the flash file system) to be
used for saving alarm messages.
32
[Starting file number] Offset to starting file for alarm messages in relation to
number of alarm message files stated by [Num of
alarm files].
0
[Num of used files] Number of files currently used within the alarm message
buffer.
0
Output Parameter Description Default