Filter
Top Products
SmartCell 6A000/ZX-250 Reference Manual 2-1
2 CONSOLE COMMANDS
Alarm
Use Alarm to set alarm messaging features.
Operators
show, clear, flush
Parameters
In the Output Parameter table below, (
</d>
) indicates parameters that are available only through the
show alarm
/d
(detailed) command. (
</s>
) (summarized) appears next to a parameter to indicate that this parameter appears in
both the summarized table and the detailed table
SERVER SVC
XX
Input Parameter Description Value/Field Size Default
[Index] Index for showing the
particular alarm.
1, 2, 3, 4.../
n/a
ALL
Output Parameter Description Default
[AlarmNumber] (
</s>
) Numeric position of specified alarm within alarm
message buffer.
1, 2, 3, 4...
[Module] (
</s>
) Four-character name of the software module that
generated the log and alarm entries.
See Software Modules
Table under “LogTrace” .
[SubModule] (
</s>
) Four-character name of the software submodule that
generated the log entry that created this alarm message.
See Software
SubModules Table under
“LogTrace” .