Filter
Top Products
2-202 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Examples
switch_prompt # add uniroute
PortNumber(A1) : a3
UNIATMAddress():39:00:00:00:00:00:00:11:22:33:44:55:66:11:22:33:44:55:66:01
switch_prompt # add uniroute
PortNumber(A1) : a3
UNIATMAddress():39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:02
switch_prompt # add uniroute
PortNumber(A1) : a3
UNIATMAddress():39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:03
switch_prompt #
switch_prompt # delete uniroute
PortNumber(A1) : a3
UNIATMAddress() :39:00:00:00:00:00:00:00:99:00:11:22:33:11:22:33:04:05:06:02
Deleting Static Route.
Confirm(y/n)?: y
switch_prompt #
switch_prompt # show uniroute
PortNumber(ALL) :a3
Port# RouteType Atm Address
===========================================================================
A3 STATIC 39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:01
A3 STATIC 39:00:00:00:00:00:00:00:20:d4:14:15:00:11:22:33:04:05:06:03
switch_prompt #
show
uniroute
[PortNumber] <portnumber>
[UNIATMAddress]
<uniatmaddress>
All
Displays the UNI ATM addresses for the specified port and
specifies whether they are static or dynamic.
flush
uniroute
[PortNumber] <portnumber>
[UNIATMAddress]
<uniatmaddress>
Administrator
Flushes all (static and dynamic) UNI routes (ATM addresses)
for the specified port. To flush all UNI routes for all ports,
enter
all at the port number prompt. Enter show uniroute
before this command to display information you will need as
input. Enter it again to confirm that the flush was successful.
Operator Parameters/Permissions Description