Filter
Top Products
HSIM-A6DP User’s Guide 2-1
CHAPTER 2
INSTALLATION
This chapter contains instructions for the following tasks:
• Unpacking the HSIM (Section 2.1)
• Installing APIMs (Section 2.2)
• Installing an HSIM (Section 2.3)
To install the HSIM and APIMs, you need the following tools:
• Antistatic wrist strap (provided with the 6C105 chassis or standalone
hub)
• Phillips screwdriver
2.1 UNPACKING THE HSIM
Unpack the HSIM as follows:
1. Remove the shipping box material covering the HSIM.
2. Carefully remove the module from the shipping box. Leave the
module in its non-conductive bag until you are ready to install the
module.
3. Attach the antistatic wrist strap (refer to the instructions on the
antistatic wrist strap package).
4. After removing the module from its non-conductive bag, visually
inspect the device. If you notice any signs of damage, contact
Cabletron Systems Global Call Center immediately. Refer to
Section 1.7.
!
CAUTION
The HSIM-A6DP and the host module or hub are sensitive to
static discharges. Use an antistatic wrist strap and observe all
static precautions during this procedure. Failure to do so could
result in damage to the HSIM-A6DP, the host module, or hub.