Filter
Top Products
Chapter 3: Local Management
3-48 HSIM-A6DP User’s Guide
3.15.4 Changing the UNI Status
To change the UNI status from the default state of [Enabled] perform the
following steps:
1. Use the arrow keys to highlight the UNI Status field.
2. Press the SPACE bar until the option [Disabled] displays.
3. Use the arrow keys to highlight the SAVE command located at the
bottom of the screen and press ENTER. UNI has been disabled.
3.15.5 Restarting UNI
To restart UNI perform the following steps:
1. Use the arrow keys to highlight the RESTART UNI command located
on the bottom of the screen.
2. Press ENTER. UNI has been restarted.
3.15.6 Restarting the ILMI
To restart the ILMI perform the following steps:
1. Use the arrow keys to highlight the RESTART ILMI command
located on the bottom of the screen.
2. Press ENTER. The ILMI has been restarted.
!
CAUTION
Before completing the following step, ensure that this caution is
fully understood. By disabling UNI, ALL SVCs currently
operating on the HSIM-A6DP will be lost.
!
CAUTION
Before completing the following step, ensure that this caution is
fully understood. By restarting UNI, ALL SVCs currently
operating on the HSIM-A6DP will be lost.
!
CAUTION
Before completing the following step, ensure that this caution is
fully understood. By restarting ILMI, ALL SVCs currently
operating on the HSIM-A6DP will be lost.