Filter
Top Products
Chapter 3: Local Management
3-30 HSIM-A6DP User’s Guide
3.11.2 Changing the LEC Status (MODIFY MODE Only)
To change the LEC Status, perform the following steps:
1. Use the arrow keys to highlight the MODIFY MODE command at the
bottom of the screen and press ENTER.
2. Use the arrow keys to highlight the LEC Index field.
3. Enter the Index of the LEC you wish to modify, and press ENTER.
4. Use the arrow keys to highlight the LEC Status field.
5. Use the SPACE BAR to toggle between the options ([active] or
[notInService]) until the desired option displays.
6. Use the arrow keys to highlight the SAVE command and press
ENTER. The new LEC Status becomes enabled.
3.11.3 Configuring the LEC Automatically (CREATE
MODE Only)
To configure the LEC automatically, perform the following steps:
1. Ensure the LEC Administration screen is in CREATE MODE. If the
screen does not display “CREATE MODE”, perform the following
substeps:
a. Use the arrow keys to highlight the RETURN command at the
bottom of the screen and press ENTER.
b. From the ATM LEC screen, use the arrow keys to highlight the
LEC ADMINISTRATION menu item.
c. Press ENTER. The LEC Administration screen, in CREATE
MODE, displays.
2. Use the arrow keys to highlight the Configure LEC field.
3. Use the SPACE bar to toggle between the options until [Automatic]
displays.
4. Use the arrow keys to highlight the ELAN Name field. Enter a name
for the LEC that is no more than 32 characters in length. This step is
optional, and does not have to be performed to configure the LEC
automatically.