Filter
Top Products
The Discovery ELAN Setup Screen
HSIM-A6DP User’s Guide 3-53
3. Use the arrow keys to highlight the Status field.
4. Press the SPACE bar until the desired mode displays (Enabled or
Disabled).
5. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
6. Press ENTER, the changes are saved to memory.
NOTE
If you do not want the HSIM-A6DP to join the ELAN
immediately, the Status field may be set to “Disabled”. When
you wish the HSIM-A6DP to join the ELAN, enter this screen
and toggle the Status field to “Enabled” and proceed to the
following step.