Filter
Top Products
The ATM Redundancy Configuration Screen
HSIM-A6DP User’s Guide 3-15
3.8 THE ATM REDUNDANCY CONFIGURATION
SCREEN
To access the ATM Redundancy Configuration screen from the ATM
screen, perform the following steps:
1. Use the arrow keys to highlight the APIM REDUNDANCY menu
item from the ATM screen.
2. Press ENTER. The ATM Redundancy Configuration screen,
Figure 3-6, displays.
Figure 3-6 The ATM Redundancy Configuration Screen
NOTE
There MUST be two APIMs installed in the HSIM-A6DP for the
redundancy feature to be available.
INTERFACE 25 ATM REDUNDANCY CONFIGURATION
Device Name:6E132-25
Slot Number:X
Flash Image Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
RETURNSAVE EXIT
6E132-25 LOCAL MANAGEMENT
Redundancy Status: [Enabled]
Primary port: 1 Active port: 1
Activation of redundant port: [Automatic]
Revert to Primary port: [Automatic]
Periodic test status: [Enabled] Periodic test time: 01:00.00
Result of previous test: [ ] No test perfromed since system startup
TEST PORTS NOW RESET TO FACTORY DEFAULTS