Filter
Top Products
Chapter 3: Local Management
3-58 HSIM-A6DP User’s Guide
3.19.1 ATM Connection Setup Screen Fields
The ATM Connection Setup screen allows the user to view the current
configured virtual connections (PVCs only) on the HSIM-A6DP. This
screen also allows the user to access the ATM Add/Delete Entry screen,
which is used to create, modify, or delete PVCs.
The following list explains each of the ATM Connection Setup screen
fields:
ATM Port Current Connections (Read-Only)
This field displays the number of current PVCs on the HSIM-A6DP.
IF (Read-Only)
This field represents the virtual MIB-II interface that this Permanent
Virtual Channel (PVC) was created on.
PORT (Read-Only)
This field displays the port (APIM) on which the PVC resides.
VPI (Read-Only)
This field displays the Virtual Path Identifier of the connection. This field
should read 0 or 1.
VCI (Read-Only)
This field displays the Virtual Channel Identifier of the connection. This
field should read between 1 and 1020.
NOTE
The first two connections shown in Figure 3-18 (with VPI, VCI
values of 0, 5 and 0,16 respectively) represent ILMI and UNI.
These two connections, although disabled by the Bandwidth
Allocation feature, will always display on the ATM Connection
Setup screen.