Filter
Top Products
Using the Stand-alone Launcher
Adding Devices to the Launcher Database 4-19
3. Press Return or click on the Add button to add the IP address
range to the list box. The ranges you set in this window will be
saved in an IP Address Range database and will appear in the list
box for use each time you use the Discover Tool.
4. Repeat as necessary to add additional ranges to the list box.
To delete an entry from the IP Address Range list box:
1. Click to select the range you wish to delete, then click on the
Delete button.
Setting the Discover Parameters
To set the parameters the Discover tool will use in the discovery
process:
1. In the Device Types list box, click to select the device type(s) you
want to search for during the discovery process. Use the
selection button to determine whether the search will include all
the device types or only selected device types.
2. In the SNMP Community Names list box, click to select the
community name(s) you want to use in the discovery process.
Use the selection button to determine whether the search will
include all the community names or only selected community
names.
TIP
You can rearrange the list so that the IP Address Ranges are listed in a more
logical order (e.g., decreasing order of use) by using Up and Down located
below the list box. You may only move one entry at a time.
!
CAUTION
If you double-click on a highlighted item in the list box it will be deleted from
the list box and from the corresponding database; however, it will remain in
the IP Address text field where it can be edited and re-added to the database.
00-Instl_SEM-Solaris_Book Page 19 Monday, October 5, 1998 11:41 AM