Filter
Top Products
SmartSwitch Router User Reference Manual 43
Chapter 1: SSR Product Overview
Displaying Configuration Changes
While in Configure mode, you can display the configuration of the running system as well
as non-activated changes that are in the Scratchpad by entering the following command:
While in Enable mode, you can display the active configuration of the system by entering
the following command:
The show and system show active-config commands normally display configuration
commands in the order that they are executed. To display the configuration commands in
a different order, enter the following command in Configure mode:
Whenever you have activated commands in the scratchpad, you can compare the
activated changes with a previously-saved configuration file. To compare the activated
commands with the Startup (or another) configuration file, enter the following command
in Configure mode:
Managing the SSR
The SSR contains numerous system facilities for system management. You can perform
configuration management tasks on the SSR including:
• Setting the SSR name
• Setting the SSR date and time
•Configuring NTP
•Configuring the CLI
• Configuring SNMP services
Display running system configuration and non-activated
changes in scratchpad.
show
Display active configuration of the
system.
system show active-config
Display configuration commands in
alphabetical order.
system set show-config alphabetical
Compare activated commands with
Startup configuration file.
diff <filename>|startup