Cabletron Systems STS16-20R Switch User Manual


 
161
Monitoring the Network from the Console Statistics Menu SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
Oper Mode
The port operation mode. Possible values are:
HDX port
Half-duplex mode in which only a dedicated connection to a
station is supported. The Tx/Rx pinouts are the same as a concentrators.
HDX station
Half-duplex mode in which the port operates like a station. The
connection may be dedicated or shared. The Tx/Rx pinouts are the same as an
adapters.
FDX port
Full-duplex mode in which only a dedicated connection to a
station is supported. The Tx/Rx pinouts are the same as a concentrators.
FDX station
Full-duplex mode in which only a dedicated connection to a
port is possible. The Tx/Rx pinouts are the same as an adapters.
RI
Ring In.
Only for SmartStack 16-20R, ports 19 and 20.
RO
Ring Out. Only for SmartStack 16-20R, ports 19 and 20.
RI/RO
Ring-in/ring-out mode. Only for SmartStack 16-20R, ports 19 and 20.
Passive
this value will be displayed if the port is selected as a passive
monitoring port on the
Switched Port Analyzer
configuration screen.
Fwd Mode
The forwarding mode that will be used for transmit. Possible values are:
Cut-Thru
cut-through
Store-Fwd
store-and-forward
For ports operating at a speed of 4 Mbps, the only possible mode is Store-Fwd.