![](http://pdfasset.owneriq.net/d/df/ddf9d9a6-edcb-4041-8d1a-bb3a9d4b1780/ddf9d9a6-edcb-4041-8d1a-bb3a9d4b1780-bge3.png)
213
Monitoring Port Traffic SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
Switched Port Analyzer Screen
To open this screen from the main menu, select
Configuration
→
→→
→
Switched Port
Analyzer
.
The following information is displayed on this screen:
Analyzer Port Number
The port to which the network analyzer or probe will be attached.
➽ Note:
This port should be assigned to its own CRF. For information about assigning
ports to a CRF, see “VLAN Configuration” on page 86.
Monitored Port Number
The port that will be monitored. To change a setting select it and specify the new
value. To disable the Switched Port Analyzer port, select
Port to Monitor
and set
it to
0.
To save the changes, select
Return
➽ Note:
The analyzer port and the monitored port must be on the same physical
switch, not on different switches in the stack.
❏