Filter
Top Products
55
Installation SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
4. Installation
This chapter contains step-by-step instructions for installing, connecting and
verifying that the SmartStack STS16-20D Token Ring Switch and/or the
SmartStack STS16-20R Token Ring Switch is operating properly.
Installation Summary
The installation sequence is listed in the following steps.
1. Plan for installation. Read Chapter 3, “Preparing for Installation”.
2. Unpack the switch.
3. Gather the materials.
4. Mount the switch.
5. Connect the switch to the network.
6. Verify the operation of the switch.
➽ Note:
Complete the following step only if you will be customizing the
configuration of the switch or monitoring its activity.
7. Configure the switch.
➽ Note:
For information on front panel and back panel connectors, buttons, slots, and
LEDs, please see “Front Panel Details” on page 5 and “Back Panel Details” on
page 9 in Chapter 1.