Filter
Top Products
Specifying Copy Settings
3-25
Customizing Settings
3
2
Press [ ] or [ ] until <MM/INCH ENTRY> appears ➞
press [OK].
The <MM/INCH ENTRY> menu appears.
3
Press [ ] or [ ] to select ‘INCHES’ or ‘MM’ ➞
press [OK].
If you want to set the standard frame erase width in inch, select ‘INCHES’.
If you want to set the standard frame erase width in mm, select ‘MM’.
The selected mode is set, and the LCD display returns to the <COPY
SETTINGS> menu.
4
Press [Stop] to return to the Standby display.
Restoring the Default Copy Settings
Modes that have been changed in Copy Settings (from the Additional Functions
menu) can be restored to their default settings. (See “Copy Settings Table,” on
p. 3-2.)
NOTE
The default setting is ‘NO’.
OK
OK
Stop