Filter
Top Products
Flow of Copy Operations
1-4
Basic Copying Features
1
Flow of Copy Operations
This section describes the flow of basic copy operations.
NOTE
•
For the following items, see the
Reference Guide
:
- Main power and control panel power switch
- Routine maintenance
•
The output quality may deteriorate if the platen glass is dirty. Always keep the platen
glass clean.
•
Do not touch the feeder or platen cover while copying. Rocking the feeder or cover can
distort the image being copied.
1
Press the appropriate keys in accordance with the messages
displayed on the LCD display.
If there are no messages displayed, this operation is unnecessary.
● If the message <INSERT CONTROL CARD> appears:
❑
Insert a control card into the optional Card Reader-E1.
The Standby display appears.
NOTE
For instructions on using the optional Card Reader-E1, see Chapter 4, “Optional
Equipment,” in the
Reference Guide
.