Filter
Top Products
Placing Originals
1-17
Basic Copying Features
1
2
Neatly place your originals with the side to be copied face up
into the original supply tray.
Place your originals as far into the feeder as they will go.
IMPORTANT
•
Do not add or remove originals while they are being scanned.
•
When scanning is complete, remove the originals from the original output area to
avoid paper jams.
NOTE
•
The scanned originals are output to the original output area in the order that they
are fed into the feeder.
•
When you are enlarging an LTR original onto 11''
×
17'' or LGL paper, place the
original horizontally.
•
You can place different size originals together into the feeder if you set the Different
Size Originals mode. (See “Different Size Originals,” on p. 2-17.)
Original Output Area