Filter
Top Products
Placing Originals
1-13
Basic Copying Features
1
1
Lift the feeder/platen cover.
IMPORTANT
The machine is equipped with an open/close sensor on the feeder/platen cover
(see circled area in the above illustration). When placing originals on the platen
glass, lift the feeder/platen cover high enough so that the open/close sensor
underneath is fully released. Otherwise, the machine may not correctly detect the
size of the originals. (Only the imageRUNNER 2020 can detect the size of an
original placed on the platen glass.)
2
Place your originals face down.
The surface of the original that you want to copy must be placed face down.
Align the top edge of your original with the back edge of the platen glass (by the
arrow in the top left corner).
Sensor