Filter
Top Products
Two-Sided Copying
2-20
Special Copying Features
2
Two-Sided Copying
The Two-Sided mode enables you to make two-sided copies from one-sided or
two-sided originals, or make one-sided copies from two-sided originals.
IMPORTANT
You may not be able to make two-sided copies on some types of paper, depending on the
paper.
NOTE
•
If you are copying in the Two-Sided mode, align the top edge of the original with the back
edge of the platen glass (by the arrow in the top left corner), or with the back edge of the
feeder.
•
Paper used to make two-sided copies must conform to the following specifications:
- Paper size: 11"
×
17", LGL, LTR, LTRR, or STMTR
- Paper weight: 17 lb bond to 24 lb bond (64 g/m
2
to 90 g/m
2
)
1 to 2-Sided
This mode enables you to make two-sided copies from one-sided originals.
IMPORTANT
Make sure to place originals with a horizontal (landscape) orientation, such as LTRR and
STMTR, horizontally. If these originals are placed vertically, the back side of the original
is copied upside down.
Originals Copy