Filter
Top Products
Specifying Copy Settings
3-14
Customizing Settings
3
3
Press [ ] or [ ] until <COPIES> appears ➞ press [OK].
The <COPIES> menu appears.
4
Press [ ] or [ ] to set the desired standard copy
quantity ➞ press [OK].
The selected mode is set, and the LCD display returns to the <STANDARD
SETTINGS> menu.
NOTE
•
You can also enter the copy quantity using - (numeric keys).
•
You can set the copy quantity from 1 to 99.
5
Press [Stop] to return to the Standby display.
Auto Collate
The Auto Collate mode enables automatic selection of the Collate (Offset Collate)
mode when originals are placed in the feeder. This is helpful when making multiple
sets of copies because you do not need to remember to select the Finisher mode.
NOTE
The default setting is ‘OFF’.
1
Press [Additional Functions] ➞ open the <COPY SETTINGS>
menu.
If necessary, see the screen shots in steps 1 and 2 of “Image Direction Priority,”
on p. 3-5.
OK
OK
0
9
Stop
Additional
Functions