Canon 2900I Printer User Manual


 
xvi
Do not use any electrical cables other than the supplied cord. Doing so may cause
fire or electrical shock.
In principle, you should not connect the printer using an extension cord or connect
too many appliances to a single power outlet. However, if there is no choice but to
use an extension cord or connect multiple appliances to a single power outlet, it is
the responsibility of the user to take care of the following cautions. If these points are
not followed correctly, a fire or electrical shock may result.
- Do not connect one extension cord to another.
- Make sure that the voltage of the power plug matches the voltage on the rating label
(attached to the back of the printer) when you use the printer.
- Use an extension cord that can carry an electrical current greater than the value
indicated on the rating label (attached to the back of the printer).
- When you use an extension cord, untie the cord binding, and insert the power plug
completely into the extension cord outlet to ensure a firm connection between the
power cord and the extension cord.
-Periodically check that the extension cord is not overheated.
CAUTION
Do not use a power source with a voltage other than that indicated. Doing so may
cause fire or electrical shock.
When you unplug the power cord, make sure you hold the cord by the plug. If you pull
on the cord itself, the cord may experience damage such as exposure of the core
wires or an open circuit, and electrical current flowing out of the damaged section
can cause fires or electrical shock.
Whenever you pull out the power plug, make sure there are no objects around the
power plug. Do not pull out the power plug in an emergency.
Handling
WARNING
Do not disassemble or modify this product. This product contains high voltage and
high temperature internal parts, which could cause a fire or electrical shock if
tampered with.
Electrical components can produce unexpected hazards if not handled correctly.
Make sure that the power cord, cables, and internal gears and electrical components
are kept out of reach of children.
If this product emits strange noises, smoke, excess heat, or unusual smells, turn the
power off immediately, and disconnect the USB cable if it is connected. Next, pull out
the power plug, and contact the store where you purchased this printer. Continuing
to use a faulty printer may cause fire or electrical shock.
Do not use flammable sprays near this product. If the gas from a spray comes into
contact with the electrical unit inside the printer it may ignite or cause an electrical
shock.