Filter
Top Products
The cover slides down into the printer.
3. Use a pointed object, such as a ballpoint pen, to change the DIP
switch settings. A DIP switch is OFF when it is up, and ON when
it down.
4. Close the DIP switch cover after making your selections.
The new DIP switch settings take effect when you turn on the printer.
If you turn off or reset the printer, or if the printer receives the Set Initial
Conditions command from a software program, the printer resets its
functions to the settings defined by the DIP switches.
BJ-10 Mode
When the printer is in BJ-10 mode (DIP switch 12 is OFF), you can set
the DIP switches to control the following functions:
DIP switch Function OFF ON
1 Horizontal print
position
Letter size or
COM 10 envelope
A4 size or
DL size envelope
2 Text scale mode Disabled Enabled
3 Reduction mode Disabled Enabled
4 Page length 11 inches 12 inches
5
Ch t t
St1
St2