Filter
Top Products
Chapter 8
Customizing the Printer
This chapter describes the factory default settings of the printer and the
steps you follow to customize these settings for your particular printing
needs.
You will find that the factory default settings provide features to meet
most of your printing needs. With these settings, your printer emulates
any Canon BJ printer and the IBM Proprinter X24E. This means you
can use the printer with any software application that supports these
printers.
You want to make sure the printer's settings match the requirements of
your software application. If you have a unique printing requirement,
you can customize the printer by changing the DIP switches settings as
described in this chapter.
Your printer is designed to be used in BJ-10 mode and provides
numerous printing features in this mode. If your software application id
designed to print only on an Epson LQ printer, you can use the DIP
switches to change the printer control mode to Epson LQ.
Factory Default Settings
The following table shows the factory default settings of the printer:
Function Setting
Character Pitch 10 characters per inch (cpi)
Line spacing 6 lines per inch (lpi)
Print quality High quality (HQ) mode
Beeper Enabled
Automatic carriage return (CR) Disabled (no CR with line feed)
Slashed zero Disabled (zero not slashed)
Vertical tab stops No vertical tabs set
Horizontal tab stops Column 9 then every 8th column
Vertical margins Top margin = first print line
Bottom margin = page length
Horizontal margins Left margin = 0
Right margin = maximum print width
Print direction
(
text
)
Bi-directional