Filter
Top Products
Printing Directly from the Remote UI
5-16
5
How to Use the Direct Print Function
8
Specify the settings under [Print Settings] according to your
preference.
Details of each menu are shown below.
[Copies] This setting enables you to specify the number of copies
printed.
[Paper Size] This setting specifies the output paper size.
• If [Auto] is selected, the most appropriate paper source is
selected according to the PDF file page size.
• If a setting other than [Auto] is selected, the file is printed so
that the orientation of the long edge of the PDF file page size
and the long edge of the selected paper matches.
If the PDF file page size exceeds the largest or smallest size of
the user defined paper, jobs are canceled. (They are not
included in the Prints count.)
[Paper Type] This setting specifies the output paper type.
[Manual Feed] This setting enables you to fix the paper feed source to manual
feed.
[Enlarge/Reduce
to Fit Paper Size]
If you select the checkbox, the selected page size is enlarged
or reduced with the same ratio for both the length and width to
print within the printable area. However this function is not
available if [Auto] is selected in [Paper Size].