Filter
Top Products
Printing Directly Using the Command Prompt
5-38
5
How to Use the Direct Print Function
Printing Directly Using the Command Prompt
You can print directly by entering the LPR command in the command prompt.
You can also set the direct printing settings from the touch panel display when you
send data to this machine for direct printing via the LPR command prompt or the
Remote UI.
• Specifies from the command prompt
You can specify LPR command settings with the P option, where each item is
separated with an underscore ( _ ). The following commands are supported with
this machine.
Command example (with Paper Size as "LETTER," Layout as "DUPL," and Copies
as "20"):
Input Example : lpr -S <IP Address> -P LETTER_DUPL_C20 <file name>
NOTE
If settings have not been specified from the command prompt, settings in the touch panel
display will be enabled.
Item Command
Paper Size LETTER, LEGAL, LEDGER (11" x 17"), A3, A4, A5, B4, B5
Layout
SIMP (One-sided), DUPL (Two-sided/Long Edge),
DUPS (Two-sided/Short Edge)
Copies C<Number of copies>.