Filter
Top Products
8-16 Receiving Faxes Chapter 8
Telecom FaxAbility (New Zealand Only)
In New Zealand, Telecom N.Z. offers the FaxAbility capability. This service allows you
to assign two numbers to your line: one for fax and one for telephone. When the fax
number is called, the network sends a specific ring tone which your unit recognises and
automatically handles as a fax call. If the telephone number is called, a different ring
tone is sent out from the network so that the call is handled as a voice call. This means
that there is no switching delay at the caller’s end.
n
You can also set the MultiPASS for Telecom’s FaxAbility service from the MultiPASS Suite.
(1 MultiPASS Suite Software User’s Guide)
Contact Telecom for connection information.
Setting the MultiPASS for Network Switch
Follow this procedure to set the receive mode to NET SWITCH:
1 Press Function.
2 Press Data Registration.
3 Press Set.
4 Use d or u to select RX SETTINGS.
5 Press Set.
6 Use d or u to select RX MODE.
7 Press Set.
Ex:
8 Use d or u to select NET SWITCH.
9 Press Set.
INCOMING RING
NET SWITCH
FAX ONLY MODE
RX MODE
ECM RX
RX SETTINGS
USER SETTINGS
DATA REGSTRATION