Filter
Top Products
12-2 Maintenance Chapter 12
Periodic Cleaning
Your MultiPASS requires little periodic maintenance. This section describes the
necessary cleaning procedures for your MultiPASS. Please note the following before
cleaning your unit:
• Be sure to disconnect the power cord before cleaning the MultiPASS. Since
documents in memory are erased when the power is disconnected, print any
documents stored in memory before disconnecting the power cord. (1 pp. 7-17,
8-11, 8-13)
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick
to the components or generate static charges.
c
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical
cleaner to clean the interior of the MultiPASS; these can damage the MultiPASS
components.
Cleaning the MultiPASS’ Exterior
Follow this procedure to clean the MultiPASS’ outer casing:
1 Disconnect the power cord from the
MultiPASS.
2 Wipe the MultiPASS’ exterior with a
clean, soft, lint-free cloth moistened with
water or diluted dishwashing detergent
solution.
3 When you are finished, reconnect the
power cord.