Filter
Top Products
Chapter 12 Maintenance 12-15
Maintenance
9 Insert the BJ tank into the far right slot
on the BJ cartridge, then press it down
from the top until it clicks into position.
10 For the Colour and Photo BJ cartridges,
repeat steps 8 and 9 to install the other
BJ tanks. Be sure to install them in the
correct order and to insert them in the
slots from right to left.
• Do not use the BJ cartridge with any of its
BJ tanks missing as this can cause the BJ
cartridge to clog.
11 Close the printer cover.
• The LCD displays CART. RETURN while
the cartridge holder moves to its home
position on the right side of the unit. The
MultiPASS then cleans the print head which
takes about 20 seconds.
12 Close the document tray.
13 Align the print head. (1 p. 12-16)
n
If you need to unplug the MultiPASS, wait until the unit is in standby mode (time and
receive mode displayed in the LCD). Otherwise the cartridge holder may not be in its home
position causing the BJ cartridge to remain uncapped and dry out.
I
nkTa
BCI-
Y
ell
ow
M
a
de
in J
apan
P
U
S
H
I
n
k
T
a
n
k
B
C
I-
3
e
M
Y
e
llo
w
M
a
d
e
i
n
J
a
p
a
n
P
U
S
H
P
U
S
H