Filter
Top Products
Chapter 13 Troubleshooting 13-5
Troubleshooting
LCD Messages
The following messages are displayed in the LCD when the MultiPASS is performing a
function or encounters an error. The error code appears in the ACTIVITY REPORT.
(1 p. 11-3)
Message Error Code Cause Action
AUTO REDIAL
BUSY/NO SIGNAL
—
#005/018
The unit is waiting to
redial the other party’s
number because the line
was busy or the other
party did not answer
when you tried to send
the document.
The telephone number
you dialled is busy.
The fax number dialled
was incorrect.
The other party’s fax
machine is not working.
The other party is not
using a G3 machine.
The touch tone/rotary
pulse setting on your unit
is incorrect.
The receiving fax
machine did not answer
within 55 seconds (after
all automatic redialling
attempts).
Wait for the unit to
automatically redial the
number. If you want to
cancel automatic redialling,
wait until the unit starts
dialling the number, press
Stop then T. (1 p. 7-11)
Try sending the document
at a later time.
Check the fax number and
dial again.
Contact the other party and
have them check their fax
machine.
Contact the other party and
ask them to send or
receive the document
using a G3 machine.
Set your unit to the setting
that matches your
telephone line. (1 p. 3-10)
Contact the other party and
have them check their fax
machine. You can try to
send the document using
manual sending via the
handset (1 p. 7-7). For an
overseas call, add pauses
to the registered number.
(1 p. 9-2)