Filter
Top Products
Chapter 3 Registering Information 3-11
Registering
Information
Dialling Through a Switchboard
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your
MultiPASS is connected through a PBX or other telephone switching system, you have
to dial the outside line access number first, and then the number of the party you are
calling.
To facilitate this procedure, you can register the access type and the outside line
access number under the R button so that you only need to press Function and R
before dialling the fax/telephone number you want to reach. This is explained below.
Registering the R Button
Follow this procedure to register the access type and outside line access number under
the R button:
1 Press Function.
2 Press Data Registration.
3 Press Set twice.
4 Use d or u to select R-KEY SETTING.
5 Press Set.
6 Use d or u to select PBX.
7 Press Set.
Ex:
8 Use d or u to select the access type of
Ex:
your switching system.*
• You can select from the following:
– PREFIX
– HOOKING
– EARTH CONNECTION**
PREFIX
EARTH CONNECTION
PBX
PSTN
R-KEY SETTING
DATE & TIME
USER SETTINGS
DATA REGSTRATION
*The default setting for the UK and Ireland is EARTH CONNECTION.
The default setting for Australia, New Zealand, Hong Kong, Malaysia, and Singapore is HOOKING.
**EARTH CONNECTION is not available in Australia, New Zealand, Hong Kong, Malaysia, or Singapore.