Filter
Top Products
DR-3010C
DR-3010C
18
When you turn the computer and the scanner ON for the first time, the Plug and
Play function of Windows recognizes the scanner and automatically installs the
required device driver.
IMPORTANT
• If you turn the power OFF, wait at least 10 seconds before turning it ON
again.
• If you will not be using the scanner for an extended period, you should
disconnect the power cord from the AC outlet for safety.
The scanner will be recognized the first time it is connected to the computer.
1
Make sure that the scanner and computer are connected properly.
2
Press the power switch on the back of the scanner to turn the scanner ON
( setting).
3
Windows automatically recognizes the DR-3010C as new hardware.
NOTE
If you set the power switch on the back of the scanner to ‘AUTO’, the scanner is
linked to be automatically turned ON/OFF in accordance with the power of the
computer.
Scanner Recognition
3
.
T
urn
i
ng
th
e
P
ower
ON