Filter
Top Products
DR-3010C
DR-3010C
26
NOTE
• When scanning folded documents, switch the feed selection lever
to (Bypass).
• When placing folded documents, place the document into the scanner so that
the fold is on the right side. The side of the folded document facing you will
become the right side of the combined image.
• When scanning folded documents, click the [Basic] tab in the Properties for
Canon DR-3010C dialog box → select [Folio] from the Scanning Side drop-
down list → click [OK].
(See Chapter 4, "ISIS/TWAIN Driver Settings - Scanning Side Settings," on
p.43.)
• The maximum size for the combined image is 11" x 17"/A3. When using the
Folio function for an irregular document size, click the [Basic] tab in the
Properties for Canon DR-3010C dialog box → select [Auto-detection] from the
Page Size drop-down list → click [OK].
• Ultrasonic Double Feed Detection cannot be used when scanning folded
documents.
When scanning with the DR-3010C, in addition to scanning from an application,
you can also use the Job function to perform scanning by pressing the Start key.
This section describes the procedures for scanning using the CapturePerfect 3.0
software included with the scanner, scanning using the Job function, and other
special scanning. For details on scan settings, see Chapter 4, "ISIS/TWAIN
Driver Settings," on p.38.
This section describes how to start CapturePerfect 3.0, select the scanner, and scan
documents.
The Scan Batch to File function is used here as an example.
For details, see the
CapturePerfect 3.0 Operation Guide
and CapturePerfect Online
Help.
1
From the Windows task bar, click [Start] → [All Programs] →
[CapturePerfect 3.0] → [CapturePerfect 3.0].
Scanning With CapturePerfect 3.0
4. Scanning Methods