Filter
Top Products
DR-3010C
DR-3010C
43
This section describes the procedure for setting the resolution for scanning.
1
Click the [Basic] tab in the Properties for Canon DR-3010C dialog box →
select the resolution for scanning from the Dots per inch drop-down list →
click [OK].
NOTE
• Higher resolutions provide clearer images, but produce larger files.
• When the selected resolution is 300 dpi or less, the Moire Reduction setting is
automatically enabled to allow reduction of the moire effect (a shimmering,
wavy pattern) in scanned images.
This section describes the procedure for setting the page side settings for
scanning.
1
Click the [Basic] tab in the Properties for Canon DR-3010C dialog box →
select the page side to scan from the Scanning Side drop-down list → click
[OK].
NOTE
• Specify one of the settings below according to the page side setting you want to
use.
- [Simplex]
Scan only the front side of documents loaded into the feeder.
- [Duplex]
Scan both sides of documents.
Scan Resolution Settings Scanning Side Settings