Filter
Top Products
DR-3010C
DR-3010C
47
This section describes the procedure for adjusting the brightness and contrast
for scanning.
1
Click the [Brightness] tab in the Properties for Canon DR-3010C dialog box
→ adjust the [Brightness] slider and [Contrast] slider to adjust the
brightness and contrast for scanning → click [OK].
NOTE
• The settings you can specify are as follows:
- [Brightness]
Adjusts the brightness of images to be scanned.
y If images are too dark or if text on the back bleeds through, drag the slider
to the right to increase the brightness.
y If images are too light, drag the slider to the left to decrease the brightness.
- [Contrast]
Adjusts the contrast of images to be scanned.
- [Used the Back Side Brightness] Check Box
If the brightness of the front and back pages of the document are different,
select this check box to adjust only the brightness on the back side.
- [Used the Back Side Contrast] Check Box
If the contrast of the front and back pages of the document are different, select
this check box to adjust only the contrast on the back side.
• The availability of brightness and contrast settings are as follows, according to
the setting selected from the Mode drop-down list in the Basic tab.
{
: Available for setting
−: Not available for setting, or automatically set
7
Brightness/Contrast Adjustment
Scanning mode Brightness Contrast
Back Side
Brightness
Back Side
Contrast
Black and White
{{{{
Error Diffusion
{{{{
Advanced Text Enhance-
ment
{ −−−
Advanced Text Enhance-
ment II
{{−−
256-level Gray
{{{{
24-bit Color
{{{{
Auto Color Detection
{{{{